Search Catalog
      GO   
 All Categories    Hot Stamping machines
All Categories > Hot Stamping Machines > Hot Stamping machines > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Hot Stamping machines

Check up to five results to perform an action.

STI manufactures and sells Hot Stamping Presses. The mechanical action of the press incorporates a pair of rolling ball die-set bushes to ensure long, trouble free life and accurate alignment. The frame is strong but simple with a hydraulic height adjustment and a micro stroke adjustment for fine setting. The unique method of heat insulation confines the heat to the platen where it properly belongs.

The timer is a solid-state, pure-dwell, plug-in module and the heat controller uses a platinum heat sensor to ensure excellent heat control. These features add up to a machine that makes a good impression wherever it is used.

Features of the STI Hot Stamp Press
  • Heavy construction of frame
  • Hydraulic lift for head assembly allows one operator to raise and lower head
  • Micro height adjustment speeds final set-up
  • Optional stroke limiter saves 60% of air
  • Solid state heat control, accurate to +/- 1°F
  • Platinum heat sensor eliminates 1% drift found in regular thermocouple
  • Solid state pure dwell timer

Add Features with Optional PLC Controller
  • Digital readout of all controls
  • Solid state foil delay timer
  • Automatic batch counter with shut off features
  • Warning lamps pinpoint problems immediately
  • Removable key supervisory control of all settings
  • Maximum temperature preprogrammed. Will read actual head temperature
  • Fail-safe circuits stop machine if component failure negates hand switch safety circuit
  • 115 V A.C. or 220 V A.C. available on all models

Accessories and Other Equipment Available
  • Four wall chase
  • Additional head slide
  • Electric foil feed
  • Front to back foil feed
  • Air cylinder turntable with 12" diameter stop plate, 6 stations standard (Others on request - requires safety gate)
  • Extra 12" diameter x 1/2" aluminum dial plate
  • Air slide table - 6" x 8" - 6" stroke
  • Hand slide table - 6" x 8" - 6" stroke
  • Safety gate - Wraparound Lexan™ with interlock and reset
  • Vacuum takeoff
  • Machine stand




Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Pressure

Impression Area

Distance from Center of Head to Frame

Maximum Part Height

Electrical Requirements

Dimensions

Shipping Weight

Air Consumption (30 cycles/min.)

Maximum Air Line Pressure

HS 100 1 Ton
890 kg
6" x 6" (127 mm x 152 mm)
6" x 8" (152 mm x 203 mm)
203 mm
8"
228 mm
9"
5" x 6": 850 Watts
6" x 12": 1400 Watts

6" x 8": 1050 Watts
40" H x 24" W x 24" D 300 lbs. .425 cu. m
15.21 cu. ft.
120 PSI
HS 150 1.5 Ton
1285 kg
6" x 12" (152 mm x 305 mm)
6" x 6" (127 mm x 152 mm)

6" x 8" (152 mm x 203 mm)
203 mm
9"
12"
305 mm
5" x 6": 850 Watts
6" x 12": 1400 Watts

6" x 8": 1050 Watts
40" H x 26" W x 26" D 350 lbs. .688 cu. m
24.6 cu. ft.
120 PSI
  Results 1 - 2 of 2 1